Classification: Avery Dennison – Public Setting Defaults 6-5
Setting the Power- u p Mode
Power-up mode lets you decide how your printer starts each time you turn it on:
♦ Ready to receive data and start printing (online mode).
♦ Operator can select a format to print (offline mode).
♦ Operator can enter data for a selected format using the 939i Keyboard or USB keypad
(offline mode). For offline data entry information, see the 939i Keyboard’s Operating
Instructions.
Select To
Online When the printer is turned on, you see “Ready.”
Offline When the printer is turned on, you see Data Entry mode. Make sure
formats are loaded into flash memory and a keyboard is connected if you
need to enter data.
Setting the Numeric Format
Numeric format determines how numeric values appear in your printed data.
Select To
Default Latin numerals print in Latin; Arabic text prints in Arabic.
Arabic-Indic Latin numerals print in Arabic; Arabic text prints in Arabic.
Eastern-Arabic Latin numerals print in Arabic; Arabic text prints in Arabic.
Examples
Latin Characters: 95% cotton
Latin Numerals with Arabic Characters: بطﻗ 95%
Arabic Numerals with Arabic Characters:
Arabic-Indic:
Eastern- Arabic:
Using Flash Storage
Packets (formats, fonts, graphics) stored in flash memory are saved when the printer is
turned off.
Note: Before using flash storage, format flash memory. See “
Formatting Flash
Memory” for more information.
Select To
Disabled Does not allow flash storage.
Enabled Allows flash storage for formats, fonts, and graphics.
To Next Page
Loading...
