Classification: Avery Dennison – Public Using Diagnostics 10-3
Using a Password
The password feature prevents formats, graphics or fonts from accidentally being deleted
from the printer's memory. It limits access to the Setup and Scripts menus by prompting
for a password.
Select To
No Disable the password. The password is not required to access the
Setup and Scripts menus.
“No” is the default password setting, therefore it is always shown even
if password is enabled.
Yes
Enable the password. The password is required to access the Setup
and Scripts menus. Enter the password: press FEED three times then
ENTER.
When password protection is enabled, a password is not required to clear batches, but it
is required to clear formats, graphics, and fonts.
To Next Page
Loading...
