Avery Dennison ADTP1 - Using Scripts; Initial Script Startup Procedures; Viewing Script Information

Classification: Avery Dennison – Public Using Scripts 7-1
USING SCRIPTS
This chapter explains how to load, enable, and delete scripts. You can also enable
status polling and immediate commands.
Using the Scripts menu requires custom software. Scripts can print data streams written
for other printers or define a lookup table. Contact us to create a custom script for your
printer.
You can limit access to this menu to prevent changes.
The script options are in the following table:
Option
Choices
Default
Load Script
No/Yes
No
Enable Script No/Yes No
Script Info NA NA
Delete Script No/Yes No
Status Polling Disable/Enable Disable
Immediate Commands Disable/Enable Disable
Initial Script Startup Procedures
Before you can start using a script, check the following items:
♦ Check to see if a script is already in the printer. See "Viewing Script Information" to
continue.
♦ Format flash memory, if needed. See "Formatting Flash Memory" in Chapter 6 for
more information.
♦ Download a script to the printer, if needed. See "Downloading a Script" to continue.
Viewing Script Information
You can view information about a loaded script.
Select To
Script Info View the information about the loaded script.
If a script is not loaded, you see "No script loaded."
If a script is loaded, you see the script name and version number.
If a script is already loaded, see "Enabling a Script
," to continue. If you need to
download a script, see "Formatting Flash Memory" in Chapter 6.
7