G-2 System Administrator’s Guide Classification: Avery Dennison - Public
read power Increase or decreases the strength of the RF field emitted by
the printer’s antenna to read a programmed inlay.
RFID inlays Supplies that contain an embedded programmable chip and
antenna.
supply sensor Senses whether supply is loaded or needs to be loaded in the
printer. Located in the supply path.
supplies Labels and tags used for printing.
TID The Transponder Identification Number, which contains the chip
type, features, and available custom commands supported for
tag authentication.
transponder The combination of the embedded programmable chip with an
antenna on some type of media (film, paper, etc.).
write power Increase or decreases the strength of the RF field emitted by
the printer’s antenna to program the inlay.
To Next Page
Loading...
