12
1PLEASE NOTE
1.2 SAFETY INSTRUCTIONS
ALS
20x
256
Protection against injuries by mechanical action
WARNING!
Risk of injury due to moving and rapidly
rotating parts!
Maintain a safety clearance from the
machine when it is in operation.
Never reach into a machine that is
running.
Switch off the machine before making
any mechanical settings.
Keep clear of the area around moving
parts even when the machine is stopped
if there is any possibility of the machine
starting up.
– Dancer levers work by spring tension and
may snap back if the track tension of the
label material suddenly decreases.
Always keep clear of the range of motion
of the dancer levers.
WARNING!
Entanglement hazard!
When working in the vicinity of machines
in operation, do not wear ties, loose
clothing items, jewellery, wrist watches
or similar objects on your body.
Long hair must be kept in a hair net and
must not be worn loose.
WARNING!
Crushing hazard on the dispensing edge due
to products on the conveyor equipment!
Never reach between the product and the
dispensing edge while the unit is in
operation or ready for operation.
Never reach behind the safety guard or
remove it while the unit is in operation.
WARNING!
Tripping hazard!
Lay the connection cable and pneumatic
hoses (if fitted) so that no one can trip
over them.
WARNING!
Danger of injury caused by falling label roll!
Wear safety shoes.
In applicator mode:
WARNING!
Danger of crushing between dispenser edge
and applicator pressure plate due to
applicator movement!
The applicator must only be operated
with higher-level protective equipment
1
.
If the machine is running or ready for
operation, never reach between the
applicator and the dispensing edge.
Never remove or bypass the protective
equipment to prevent reaching in while
the machine is in operation.
1) Movable, locked, separating protective equipment (EN ISO
12100-1, 3.25.4)
To Next Page
Loading...
