Avery Dennison ALS 256 - Technical specifications

21
2PRODUCT DESCRIPTION
2.1 OVERVIEW
ALS
20x
256
GB
2.1.5 Technical specifications
Characteristics
1) The maximum usable dispensing speed depends on the label geometry.
For details see separate performance matrix in the service manual.
2) At a dispensing speed range of 5 m/min to the max. speed
Labels
3) Depending on the dispensing edge width.
Label sensor
Power supply
4) For more information on fuses, see section “Replacing fuses” on page 56.
5) Not accessible for user or service technician.
Dispensing speed
1)
:
ALS 204
ALS 206
ALS 256
max. 40 m/min
max. 30 m/min
max. 50 m/min
Labelling halt precision
2)
at the peeling edge:
±1mm
Speed control: Fixed setting or automatic
speed adaption via the
rotary encoder
Label material: Converted self-adhesive
label material with liner
Internal rewinding yes
Material width (including
backing paper)
3)
:
ALS 204
ALS 206
ALS 256
up to 110 mm
up to 160 mm
up to 160 mm
Label length: 5 to 600 mm
Label roll:
Winding direction
Unwinder (outer) Ø:
Rewinder (outer) Ø:
Core (inner) Ø:
inner or outer
up to 300 mm
up to 200 mm
38.1 / 76.2 / 101.6 mm
(1.5 / 3 / 4 ")
Distance to peel edge
L-shape dispensing
edge:
V-shape dispensing
edge:
19 mm
77 mm
Sensor type: Transmission sensor,
NPN/PNP (switchable)
System voltage:
ALS 20X
ALS 256
110 V (AC) at 60 Hz
power frequency
(permissible tolerance
±10%)
230 V (AC) at 50 Hz
power frequency
(permissible tolerance
±10%)
100-240 V (AC) at
60/50 Hz power
frequency (permissible
tolerance ±10%)
Current consumption:
ALS 20X
ALS 256
max. 4 A at 110 V
max. 2 A at 230 V
max. 4 A at 100 V
max. 2 A at 240 V
Power consumption:
ALS 20X
ALS 256
max. 460 VA
max. 460 VA
Fuses:
ALS 20X
ALS 256
F1, F2: T5AH 250 V
4)
Fuses integrated in the
power supply
5)