66 | EC Declarations User Manual ALS 20x 256 | file version 00 | 01/2015
ALS
20x
256
Appendix regarding the Declaration of Incorporation
List of the essential health and safety requirements applied and fulfilled for the product named in the declaration
of incorporation, relating to the design and construction of machinery.
Number
Annex I
Designation
Not appli-
cable
Fulfilled Remark
1.1 General remarks
1.1.2. Principles of safety integration X
1.1.3. Materials and products X
1.1.4. Lighting X
1.1.5. Design of machinery to facilitate its handling X
1.1.6. Ergonomics X
1.1.7. Operating positions X
1.1.8. Seating X
1.2. Control systems
1.2.1. Safety and reliability of control systems X
1.2.2. Control devices X
1.2.3. Starting X
1.2.4. Stopping
1.2.4.1. Normal stop X
1.2.4.2. Operational stop X
1.2.4.3. Emergency stop X
1.2.4.4. Assembly of machinery X
1.2.5. Selection of control or operating modes X
1.2.6. Failure of the power supply X
1.3. Protection against mechanical hazards
1.3.1. Risk of loss of stability X
1.3.2. Risk of break-up during operation X
1.3.3. Risks due to falling or ejected objects X
1.3.4. Risks due to surfaces, edges or angles X
1.3.5. Risks related to combined machinery X
1.3.6. Risks related to variations in operating conditions X
1.3.7. Risks related to moving parts X
1.3.8. Choice of protection against risks arising from moving parts
1.3.8.1. Moving transmission parts X
1.3.8.2. Moving parts involved in the process
Requires protective
device
a
1.3.9. Risks of uncontrolled movements X
1.4. Required characteristics of guards and protective devices
1.4.1. General requirements
a
1.4.2. Special requirements for guards
1.4.2.1. Fixed guards X
1.4.2.2. Interlocking movable guards
a
1.4.2.3. Adjustable guards restricting access X
1.4.3. Special requirements for protective devices X
1.5. Risks due to other hazards
1.5.1. Electricity supply X
1.5.2. Static electricity X
1.5.3. Energy supply other than electricity X
To Next Page
Loading...
