33
2PRODUCT DESCRIPTION
2.4 FUNCTION DESCRIPTIONS
ALS
20x
256
2.4.1 Overview of functions
[28] Functions menu – part 1 (grey shading = function is described in
the following).
1a) Only appears if LABEL SETUP > Multi label mode = „x labels/start“.
1b) Only appears if LABEL SETUP > Multi label mode = „3 labels/start“.
2) Only appears if LABEL SETUP > Stop count. mode = „On“.
LABEL SETUP MACHINE SETUP
(continued)
INTERFACE PARA
(continued)
Load prod.profil Dispenser type Labelsen. InType >EASYPLUGINTERPR DHCP host name
Gap detect. mode Store prod.prof. Startsen. In.Type Interface FTP server
Dispense speed Del. prod.profil Start disp. mode Dispenser ID no. FTP Password
Slew speed Dispense counter Start error stop Spooler size WEB server
Label pitch Disp. Cnt. Reset On inhibit enter WEB admin passw.
Lab. stop offset Factory settings On inhibit leave >COM1 PORT WEB supervisor p.
Start offset Custom defaults Turn-on mode Baud rate WEB operator p.
Product length Store Parameters Language No. of data bits
Multi label mode Auto Sensor Adj. Access authoriz. Parity
Label 2 offset
1a
Sensor Adjust Materialend err Stop bits
Label 3 offset
1b
Speed Adaption Materialend warn Data synch.
Miss. label tol. Encoder Type Rewinder full Frame error
Miss. label mode Encoder Resol. Ext. OD sensor
Stop count. mode Encoder Diameter OD Sens.polarity >NETWORK PARAM.
Label stop quan.
2
Rewinder Operat. IP Addressassign
Tandem Operation IP address
Tandem startmode Net mask
Tandem synchron. Gateway address
Slave IP address Port address
Tandem Distance Ethernet speed
Label sens. type MAC Address
2.4 FUNCTION DESCRIPTIONS
To Next Page
Loading...
