Avery Dennison ALS 256 - Design Models; Right-Handed Version; Left-Handed Version

24
2PRODUCT DESCRIPTION
2.1 OVERVIEW
ALS
20x
256
GB
2.1.6 Design models
The ALS 20X and ALS 256 label dispensers are
available in two designs for differing conveyor belt
directions.
Right-handed version
– The products are transported from left to right [11].
– The dispensing edge is located on the right side.
– Abbreviation: RH
Left-handed version
– The products are transported from right to left [12].
– The dispensing edge is located on the left side.
– Abbreviation: LH
The label dispenser operation described in this
manual is based on the right-handed version.
The left-handed version is only taken into
account if the explanations or figures of the
designs differ significantly.
[11] Right-handed version
A ALS 20X
B Product on the conveyor belt
C Labelled product
[12] Left-handed version
A
B
C