Avery Dennison ALS 256 - Dimensions; Ambient Conditions; Integration; Certificates & Markings

23
2PRODUCT DESCRIPTION
2.1 OVERVIEW
ALS
20x
256
GB
Dimensions
8) Measurements without the dispensing edge bracket and dispensing edge
Ambient conditions
Integration
Certificates & Markings
– CE, TÜV-Mark, FCC, CCC, GOST,
C
TÜV
US
-Mark
– The regulation DIN EN 55022 demands for class A
devices the following text to be printed in the
manual:
„WARNING: This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.“
– The FCC regulation demands the following
information text for class A devices:
„NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case
the user will be required to correct the interference
at his own expense“
Height x width x depth:
8)
ALS 204
ALS 206
ALS 256
492 x 488 x 371 mm
492 x 488 x 402 mm
492 x 488 x 402 mm
Weight:
ALS 204
ALS 206
ALS 256
36 kg
38 kg
40 kg
Installation location: – Inside buildings
– Protected from wind
and spray water
–Dry
– Not in areas with
potentially explosive
atmosphere
Operating temperature: 5 to 40°C
Humidity: 30 to 85%, (non-
condensing)
Noise
(at a distance of 1 m):
72 dB(A)
Protection class: IP 21
IP 65 special equipment
for ALS 20X
Sea level: Operation to max. 2000 m
above sea level
Mounting positions: side / bottom / rear
Labelling positions: top / side / bottom
Dispensing edges: V-shape
L-shape
fixture 90° pivoting