Avery Dennison ALS 256 - Pneumatic Dispensing Edge; V-Shape Dispensing Edge; Adjustable Dispensing Edge Holder

26
2PRODUCT DESCRIPTION
2.2 OPTIONS
ALS
20x
256
GB
Pneumatic dispensing edge
– The dispensing edge is pivoted in the dispensing
head. Compressed air presses the dispensing edge
onto the surface of the product.
– Allows compensation for height differences
between the products or on the product surface.
V-shape dispensing edge
Not for ALS 256!
– An alternative for applications which do not leave
enough space for the standard dispensing edge hol-
der, which juts out to the bottom side.
– Is attached directly to the machine
Adjustable dispensing edge holder
Enables a vertical fine adjustment of the dispensing
edge towards the product without moving the machine
[19A].
[17] Pneumatic dispensing edge
[18] V-shape dispensing edge
[19] Adjustable dispensing edge holder (A)
A