27
2PRODUCT DESCRIPTION
2.2 OPTIONS
ALS
20x
256
Outer Diameter control sensor
The outer diameter control sensor [20A] (OD sensor)
triggers a warning, if the label roll outer diameter falls
below a certain, adjustable value.
Dust/Splash guard
Available only for ALS 20X.
Additional sealing of the electrical connections and of
the housing fulfils the requirements of the IP65
protection class [21A].
Additional material guide disk
The additional material guide disk [22A] improves the
lateral guiding of the material roll. This option is
especially recommended, if very narrow material
(< 30 mm width) is processed.
[20] OD sensor (A)
[21] Dust/splash guard of the electrical connections (A)
[22] Additional material guide disk (A)