34
2PRODUCT DESCRIPTION
2.4 FUNCTION DESCRIPTIONS
ALS
20x
256
[29] Functions menu – part 2.
SIGNAL INTERFACE
(continued)
SERVICE/DIAGNOS. SERVICE DATA
(continued)
Interface mode
>AI BOARD SIGNAL
Service >MODULE FW VERS. Work place
>PLC SIGNALS Applicator type Serv. data reset System version Company name
End dispense mod Apply mode Sensor Test System revision
Disp. end delay Start mode PS registers System date >DISPLAY DATA
End pulse width Dwell time Memory card test Applicator int. Display Version
Blow on time Test functions Display serialNr
>APPLIC. SIGNALS
Restart delay Store diagnosis >OPERATION DATA Remote disp.vers
Applicator type Position timeout Gen.Support Data Service operations Remote disp. ##
Status outputs Apply comp. time Data blocks del. Tot. mat. length
Apply mode Touch down sens. Dispensing cycl. >MEMORY DATA
Dwell time TouchDownTimeout Operation time RAM memory size
Blow on time Total Operation Flash mem size
Restart delay
>AI BOARD SIGNAL
Custom defaults
Position timeout Status signals >POWERSUPPLYDATA
Apply comp. time Type
Touch down sens. >ACTIVE INPUTS
Version
TouchDownTimeout Start signal Serial number
Inhibit signal PS Temperature
OD sensor signal Standby+On time
>CPU BOARD DATA
CPU identifier
PCB Revision
FPGA version
MAC Address
Serial number
Production date
PCB part number
Board part numb.
Manufacturer
To Next Page
Loading...
