Avery Dennison Monarch 9825 - Ordering Additional Manuals; Initial Printer Setup and Connection

Ordering Programmer's Manuals
The Packet Reference Manual, which describes how to create format and
batch packets for printing labels, how to configure the printer online, how to
diagnose printer error messages, and how to perform other advanced
techniques can be downloaded from our Web site (www.monarch.com
). You
can print this manual or order a hard-copy version (part number TC9800PM).
About Monarch® MPCL™ Toolbox Utilities
The Monarch® MPCL™ Toolbox utilities are available on our Web site and
are free to download. This group of development utilities helps you
configure the printer, customize fonts, and download files. Monarch MPCL
Toolbox utilities are not label production software. Call Customer Service
for information about label production software.
9445™ Printer Online Emulation
The 9855 printer using 203 dpi (dots per inch) printing supports 94x5
emulation. You can send 94x5 data streams to this printer.
Refer to your 9445 Programmer's Manual for information about 94x5 data
streams.
Connecting the Power Cable
The power supply automatically switches between 115V or 230V. No
operator settings are required.
1. Plug the power cable into the socket. Plug the other end of the cable into
a grounded electrical outlet.
Note: Only use a certified power cable with proper voltage for the country
of installation.
2. Turn on the printer. Press ( I ) to turn on and ( O ) to turn off the printer.
1-4 Operator's Handbook