7. If you do not want the user to enter a password before they can delete
formats, graphics, fonts, or access to the Setup and Scripts menus, press
Enter/Pause. You return to the User Diagnostics Menu.
OR
Press ¼ to display "Yes" and press Enter/Pause. The password
protection is enabled for formats, graphics, fonts, and access to the
Setup and Scripts menus. You return to the User Diagnostics Menu.
8. Press Escape/Clear twice to exit to the Main Menu.
Note: When password protection is enabled, a password is not required to
clear batches, but it is needed to clear formats, graphics, and fonts.
Service Diagnostics
The Service Diagnostics menu can only be accessed by a Service
Representative, because it requires a separate password. If you need to call
Technical Support, print a test label first.
Diagnostics & Troubleshooting 10-5
To Next Page
Loading...
