Deleting a Script
You can delete a script from the printer's memory.
To delete a script:
1. From the Script Menu, press » or ¼ until you see
SCRIPTS
» Delete Script ¼
2. Press Enter/Pause.
Are you sure?
» Yes
3. Use » or ¼ to select either "Yes" or "No" and press Enter/Pause.
Selecting "Yes" deletes the current script.
Note: The flash memory used by the script is not available for other scripts
or fonts until the flash memory is reformatted. However, when you
format flash memory, you must resend the script and any
downloaded fonts to the printer.
4. Press Escape/Clear until you see the Main Menu.
Using Scripts 7-5
To Next Page
Loading...
