Enabling a Script
The script must be enabled before you can use it.
To enable or disable a script:
1. From the Script Menu, press » or ¼ until you see
SCRIPTS
» Enable Script ¼
2. Press Enter/Pause.
Enable Script?
» Yes
3. Use » or ¼ to select either "Yes" or "No" and press Enter/Pause.
Selecting "Yes" starts the script. Selecting "No" stops the script. If you
select "Yes," when you turn off the printer and turn it back on, the script
automatically starts.
Once the script is enabled, you will see
Print Mode
S Ready
The "S" in the lower left-hand corner of the screen indicates the
printer has a script loaded and enabled (the script is running).
7-4 Operator's Handbook
To Next Page
Loading...
