Using Scripts 7-1
USING SCRIPTS
This chapter explains how to load, enable, and delete scripts. You
can also enable status polling and immediate commands.
Using the Scripts menu requires custom software. It allows you to print data
streams written for other printers.
Note: Ignore these menus if you do not use Scripts.
Main Menu
Cancel All
Print Mode Repeat
Batch
Setup Scripts Diagnostics
Load
Script
Enable
Script
Script
Info
Delete
Script
Status
Polling
Immed
Commands
Your System Administrator may limit access to this menu to prevent supply,
network, script, or communication settings from being changed. If password
protection is turned on, you see
Enter Password
_ _ _ _ _ _
when you try to access the scripts menu. Get the password from your
System Administrator to continue.
7
To Next Page
Loading...
