Avery Dennison Monarch 9825 - Setting the Secondary Sign

1. Press » or ¼ until you see
DEFAULTS
» Monetary Sign ¼
2. Press Enter/Pause. The current setting is displayed, for example:
MONETARY SIGN
» USA ¼
3. Press » or ¼ until you see the country's monetary sign you want.
4. Press Enter/Pause. Press Escape/Clear until you see the Main menu.
Setting the Secondary Sign
If you select USA as the monetary sign, you can print amounts less than
$1.00 either by using a dollar sign and decimal ($0.30) or by using a cent
sign (30¢).
♦ If you set the secondary sign option to No, prices under $1.00 will print
like this: $ .45
♦ If you set the secondary sign option to Yes, prices under $1.00 will print
like this: 45¢
The same option applies to the appropriate secondary sign for monetary
signs other than USA.
To change the setting, from the Main Menu, select Setup, then Defaults.
Then, follow these steps.
1. Press » or ¼ until you see
DEFAULTS
» Secondary Sign ¼
2. Press Enter/Pause. The current setting is displayed, for example:
SECONDARY SIGN
No ¼
3. Press » or ¼ until you see the option you want. Then press
Enter/Pause. Press Escape/Clear until you see the Main menu.
Setting Defaults 6-3