Using Password Protection
The password protection feature prevents formats, graphics or fonts from
accidentally being deleted from the printer's memory. It also limits access to
the Setup and Scripts menus.
Enabling the Password (System Administrators only)
A System Administrator can enable the password that must be entered
before formats, graphics or fonts can be deleted.
1. From the Main Menu, press » or ¼ until you see
MAIN MENU
» Diagnostics
2. Press Enter/Pause. You will see
Enter Password
_ _ _ _ _ _
3. Enter the password: press Feed/Cut three times and then press
Enter/Pause.
If you enter the wrong password, you return to the Main Menu.
4. From the Diagnostics Menu, press » or ¼ until you see
DIAGNOSTICS
» User Diag
5. Press Enter/Pause. Then, press » or ¼ until you see
USER DIAG
» Password
6. Press Enter/Pause. You will see
Enable Password?
» No
The default for password protection is "No," so you will always see
"No" even if passwords are enabled.
10-4 Operator's Handbook
To Next Page
Loading...
