Enabling Status Polling
Status polling allows you to obtain information about the readiness of the
printer and the current (or last received) print job. Your System
Administrator can enable status polling while the printer is running in Script
mode. To enable status polling:
1. From the Script Menu, press » or ¼ until you see
SCRIPTS
»Status Polling ¼
2. Press Enter/Pause.
Enable Polling
No ¼
3. Use » or ¼ to select either "Yes" or "No" and press Enter/Pause.
The default is "No."
7-6 Operator's Handbook
To Next Page
Loading...
