To display menu options, press » or ¼.
♦ When the screen displays a right arrow, press ¼ to display more options.
MAIN MENU
Cancel All ¼
♦ When the screen displays a left arrow, press » to display more options.
MAIN MENU
» Diagnostics
♦ When the screen displays a left and a right arrow, press either » or ¼ to
display more options.
MAIN MENU
» Print Mode ¼
♦ When you see the menu option you want, press Enter/Pause to select it.
The Main Menu controls the printer's setup and operation. Through the
Setup Menu, you can select a sub-menu for the supply, contrast, default, or
port settings. Each of those sub-menus have several options, such as
ribbon, speed, monetary symbols, and baud rate.
Exiting an Option
To exit an option, press Escape/Clear once. You will exit to the next higher
menu.
Note: If you press Escape/Clear from a menu, your settings are not
saved. Your settings are only saved when you press Enter/Pause
from a menu.
1-8 Operator's Handbook
To Next Page
