SETTING COMMUNICATIONS
This chapter tells you how to set the serial or parallel
communication values. These values provide the link for normal online
printing.
Main Menu
Cancel All
Print Mode Repeat
Batch
Setup Scripts Diagnostics
Supply
Contrast
Defaults
Port
Settings
Flash
Memory
Serial
Comm
Parallel
Comm
5
You need to set your Serial Comm values to match your computer's online
communications. Before entering the communication values, see your
System Administrator.
The serial communication values are listed in the table below.
Option Choices Default
Baud rate
1200/2400/4800/9600/19200/
38400
9600
Word length 7/8 8
Stop bits 1/2 1
Parity None/Odd/Even None
Flow control None/Xon/Xoff/DTR/CTS DTR
Reset No/Yes No
Setting Communications 5-1
To Next Page
Loading...
