Pausing a Batch
You can pause printing by pressing Enter/Pause. You may want to interrupt
a batch to make adjustments for:
♦ Loading a different roll of supply or a ribbon. See Chapter 2, "Loading
Supplies" or Chapter 3, "Loading Ribbon" for more information.
♦ Adjusting the supply position or contrast using the Setup menu. See
Chapter 4, "Setting Supply Options
" for more information.
When you press Enter/Pause you will see
PAUSE MENU
» Print Mode ¼
You can press Enter/Pause to resume printing or press » or ¼ to display
the Pause Menu options.
The following chart shows the Pause Menu options.
Pause Menu
Cancel
Batch
Cancel
All
Print
Mode
Restart
Batch
Restarting a Batch
You can reprint a paused batch from the beginning (using the original
quantity).
1. When you press Enter/Pause, you will see
PAUSE MENU
» Print Mode ¼
2. Press » or ¼ until you see
PAUSE MENU
» Restart Batch ¼
3. Press Enter/Pause. The batch starts printing from the beginning.
Printing 8-3
To Next Page
Loading...
