The options are listed in the table below.
Option Choices Default
Supply Type
Aperture/Die Cut/Black
Mark/Continuous
Die Cut
Ribbon No/Yes Yes
Speed 2.5/4.0/6.0/efault Default
Feed Mode Continuous/On-Demand Continuous
Backfeed Off/On Off
Print Position -99 to +99 0
Supply Position -300 to 300 0
Margin Position -99 to 99 0
Separators No/Yes/Long No
Skip Index No/Yes No
Contrast -699 to 699 0
To exit an option without changing the setting, press Escape/Clear.
4-2 Operator's Handbook
To Next Page
Loading...
