Avtech AVC798 User Manual

ADVANCED MENU
~27~
3) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
4) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80.
However in some cases, it is better to change this port number for added flexibility or security.
See the example below:
STATIC
NETWORK TYPE STATIC
IP 192 . 168 . 001 . 080
GATEWAY 192 . 168 . 001 . 080
NETMASK 255 . 255 . 255 . 000
PRIMARY DNS 168 . 095 . 001 . 001
SECONDARY DNS 139 . 175 . 055 . 244
PORT 0080
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv SELECT s BACK t NEXT  ENTER
‧ PPPOE
1) NETWORK TYPE
Select the network type as PPPOE.
2) USER NAME / PASSWORD
Set “username” and “password” subscribed from your ISP supplier
3) DNS (PRIMARY DNS / SECONDARY DNS)
Key in the IP address of the domain name server obtained from your ISP (Internet Service Provider).
4) PORT
The valid number ranges from 1 to 9999. The default value is 80. Typically, the TCP port used by HTTP is 80.
However in some cases, it is better to change this port number for added flexibility or security.
See the example below:
PPPOE
NETWORK TYPE PPPOE
USER NAME ac123456
PASSWORD tech123456
IP 000 . 000 . 000 . 000
GATEWAY 000 . 000 . 000 . 000
NETMASK 000 . 000 . 000 . 000
PRIMARY DNS 168 . 095 . 001 . 001
SECONDARY DNS 139 . 175 . 055 . 244
PORT 0080
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv SELECT s BACK t NEXT  ENTER
Note: The PPPOE function needs to have one “username” and one “password” subscribed from one ISP supplier
and a “DDNS account” to transforming the dynamic IP corresponding to a specific “Hostname”.
‧ DHCP
1) NETWORK TYPE
Select the network type as DHCP.

Avtech AVC798 Specifications

General

Brand	Avtech
Model	AVC798
Category	DVR
Language	English