Badger Meter ModMAG M Series - Digital Input Wiring Diagram; Communication Interfaces

Digital Input Wiring Diagram
Figure 24: Digital input wiring diagram
OTE: N Option 2 can be connected to terminals 1 and 8 or optionally to terminals 3 and 8. Depending on which output is
used, set this output to 24V supply.
Communication Interfaces
M2000 offers following communication interfaces:
• Modbus® RTU RS485
• M-Bus
• HART
• Profibus DP
• BACnet MS/TP
The additional interface board is already plugged in by the manufacturer or can be ordered and easily plugged in afterwards.
The interface board is plugged in to the 12-pin connector at the lower right of the main board.
Conguring Input/Output (I/O)
Page 25 March 2022 MAG-UM-01272-EN-21