Badger Meter ModMAG M Series - Sensor with Sanitary Process Connections Specifications; DIN 11851 Connection Dimensions

Sensor with Sanitary Process Connections Specications
The sensor model is available with Tri-Clamp® BS4825/ISO2852, DIN11851, and more process connections. The sanitary sensor
is delivered in a stainless steel housing and with PTFE/PFA lining.
Size 3/8…4 in. (DN 10…100)
Process Connection Tri-Clamp BS4825/ISO2852, DIN 11851, customer specified, and more
Nominal Pressure 145/230 psi (10/16 bar)
Protection Class NEMA 4X (IP67), optional NEMA 6P (IP68)
Minimum Conductivity 5 µS/cm (20 µS/cm for demineralized water)
Liner Materials PTFE/PFA –40…302° F (–40…150° C)
Electrode Material Standard: Hastelloy C; Optional: Tantal, Platinum / Gold plated, Platinum / Rhodium
Housing Standard: Carbon Steel; Optional: Stainless Steel
Lay Length
Tri-Clamp Connection
3/8…2 in. (DN 10…50) 6 in. (145 mm)
2-1/2…4 in. (DN 65…100) 8 in. (200 mm)
DIN 11851 Connection
3/8…3/4 in. (DN 10…20) 7 in. (175 mm)
1…2 in. (DN 25…50) 9 in. (225 mm)
2-1/2…4 in. (DN 65…100) 11 in. (280 mm)
DIN 11851 Connection Dimensions
Remote Version in. (mm) Mounted Version in. mm
B1
A
4.72 (120)
4.80 (122)
3.15 (80)
D
DN
M2000-7
3.90 (99)
7.09 (180)
7.09 (180)
M20 (x3)
11.06 (281)
2.36 (60)
Ø 0.20 (5.2)
2.56 (65)
A
B2
D
DN
M2000-9
M20 (x3)
3.27 (83)
7.09 (180)
7.09 (180)
in. DN A B1 B2 D
3/8 10 6.69 (170) 9.37 (238) 7.24 (184) 2.91 (74)
1/2 15 6.69 (170) 9.37 (238) 7.24 (184) 2.91 (74)
3/4 20 6.69 (170) 9.37 (238) 7.24 (184) 2.91 (74)
1 25 8.86 (225) 9.37 (238) 7.24 (184) 2.91 (74)
1-1/4 32 8.86 (225) 9.57 (243) 7.44 (189) 3.31 (84)
1-1/2 40 8.86 (225) 9.76 (248) 7.64 (194) 3.70 (94)
2 50 8.86 (225) 9.96 (253) 7.83 (199) 4.09 (104)
2-1/2 65 11.02 (280) 10.47 (266) 8.35 (212) 5.08 (129)
3 80 11.02 (280) 10.67 (271) 8.54 (217) 5.51 (140)
4 100 11.02 (280) 10.98 (279) 8.86 (225) 6.14 (156)
230 psi (16 bar)
Specications
Page 71 March 2022 MAG-UM-01272-EN-21