Security
The M2000 meter security feature gives you the option to restrict access to the meter with a five-digit Personal Identification
Number (PIN). The system administrator can set up a single PIN for each of the three levels of access:
• Administration – allows access to all menu configuration screens.
• Service – allows access to service-level and user-level menu configuration screens.
• User – allows access only to user-level menu configuration screens.
Not all levels of access need to be set. If no PINs are set up, any user has access to all functions.
OTE: N The security settings also apply to remote access. All remote access to the meter is blocked unless the user is
remotely logged in.
Setting the Administration PIN
Users logged in with an Administration PIN have access to all menu configuration screens.
To set the administrator's PIN, follow these steps from the Advanced menu:
1. Select Security to view the Security menu.
2. Select Set Admin PIN to view the Admin PIN display.
3. Set the ve-digit PIN number.
4. Press [E] to save the PIN and to return to the Security menu.
Setting the Service PIN
Users logged in with a Service PIN have access to service level menu configuration screens. Service level users do not have
access to administrative screens.
OTE: N To set a service level PIN, you must first set up an administration PIN, and you must be logged in with the
administration PIN.
To set the Service PIN, follow these steps from the Advanced menu:
1. Select Security to view the Security menu.
2. Select Set Service PIN to view the Service PIN display.
3. Set the ve-digit PIN number.
4. Press [E] to save the PIN and to return to the Security menu.
Setting the User PIN
Users logged in with a User PIN have access to user-level procedures. Users do not have access to administrative or
service screens.
OTE: N In order to set a user-level PIN, you must first set up an administration PIN and a service PIN, and you must be logged
in with either PIN.
To set a User PIN, follow these steps from the Advanced menu:
1. Select Security to view the Security menu.
2. Select Set User PIN to view the User PIN display.
3. Set the ve-digit PIN number.
4. Press [E] to save the PIN and to return to the Security menu.
Programming the M2000 Meter
Page 30 March 2022MAG-UM-01272-EN-21
To Next Page
Loading...
