Size 1/4…78 in. (DN 6…2000)
Flanges Standard: ANSI B16.5, AWWA, ISO 1092-1, JIS and more in carbon steel; Optional: 304 or 316 stainless steel
Nominal Pressure Up to 1450 psi (100 bar)
Pressure Rating Line sizes 1/4…24 in: In accordance with ASME B16.5 Class 150 or Flange Rating Class 300
Line sizes 26…72 in: AWWA C-207 Class D or Class E Flange Rating
Protection Class NEMA 4X (IP67), optional NEMA 6P (IP68)
Minimum Conductivity 5 µS/cm (20 µS/cm for demineralized water)
Liner Material
Hard/soft rubber 1…78 in. (DN 25…2000) 32…176° F (0…80° C)
PTFE 1/2…24 in. (DN 15…600) –40…302° F (–40…150° C)
Halar (ECTFE) 12 in. (DN 300) and larger –40…302° F (–40…150° C)
PFA 1/4…3/8 in. (DN 6…10) —
Electrodes Materials
Hastelloy C (standard), Tantal
Platinum / Gold plated, Platinum / Rhodium
Housing Standard: Carbon steel welded; Optional: 316 or 304 stainless steel
Electrode Materials Standard: Hastelloy C22; Optional: 316 stainless steel, gold/platinum plated, tantalum, platinum/rhodium
Lay Length
1/4…3/4 in. (DN 6…20) 6.7 in. (170 mm)
1…2 in. (DN 25…50) 8.9 in. (225 mm)
2-1/2…4 in. (DN 65…100) 11.0 in. (280 mm)
5…8 in. (DN 125…200) 15.8 in. (400 mm)
10…14 in. (DN 250…350) 19.7 in. (500 mm)
16…28 in. (DN 400…700) 23.6 in. (600 mm)
30…40 in. (DN 750…1000) 31.5 in. (800 mm)
48…56 in. (DN 1200…1400) 39.4 in. (1000 mm)
64 in. (DN 1600) 63.0 in. (1600 mm)
72 in. (DN1800) 70.9 in. (1800 mm)
78 in. (DN2000) 78.7 in. (2000 mm)
Sensor Type II Dimensions
Remote Version in. (mm) Mounted Version in. (mm)
4.80 (122)
3.15 (80)
B1
4.72 (120)
D
d2 x n
DN
7.09 (180)
M20 (x3)
11.06 (281)
2.36 (60)
Ø 0.20 (5.2)
2.56 (65)
B2
D
d2 x n
DN
7.09 (180)
M20 (x3)
3.27 (83)
IMPORTANT: Flange Sizes ≤ 24 in., Standard: ANSI B16.5 Class 150 RF forged carbon steel; Optional: 300 lb forged carbon steel, 316
or 304 stainless steel
Flange Sizes > 24 in., Standard: AWWA Class D Flanges RF forged carbon steel
Specications
Page 66 March 2022MAG-UM-01272-EN-21
To Next Page
Loading...
