Displays
There are two types of displays on the M2000 meter:
• Menu Selection
• Numeric Entry
Menu Selection Display
Menu selection displays appear in the following format:
DISPLAY TITLE
>Menu Selection 1
Menu Selection 2
DIRECTIONS LINE
START MENU
>Exit this Menu
Main Menu
MORE:
↑,↓ ENTER:>
Display format Example menu
Figure 33: Menu selection displays
The top line shows the title of the display screen. Below are two menu selections. The bottom line provides directions for
user input.
Typically, a menu contains more options than fit in the two menu selection lines. Press the [↑] and [↓] buttons to scroll the
display text up and down one line at a time. When the arrow is pointed to a menu option, press [E] to select the item and
open its display.
Numeric Entry Display
Numeric entry displays appear in the following format:
DISPLAY TITLE
Description Line
Numeric Value
DIRECTIONS LINE
LOW FLOW CUTOFF
% of 300.000 GPM
2.00%
CHG: +,- NEXT:E
Display format Example numeric entry display
Figure 34: Numeric entry displays
The top line shows the title of the display screen. The second line is a description of the value. The third line shows the
current value. The bottom line provides directions for user input.
The bottom line of a numeric-value display provides prompts regarding the function of each button. The [+] and [–] buttons
change the value of the numeral. The [E] button moves the cursor one digit to the right. When the cursor is at the final,
right-most digit, pressing [E] repositions the cursor at the left-most digit. The bottom line display changes to reflect the new
function of the [E] button. Press [E] to save the current entry. Press [+] to edit the current entry.
LOW FLOW CUTOFF
% of 300.000 GPM
3.00%
EDIT:+ SAVE:E
Figure 35: Title, value description, current value, directions to user
Details on how to change and set numeric values are described in “Function Buttons” on page 27.
Programming the M2000 Meter
Page 29 March 2022 MAG-UM-01272-EN-21
To Next Page
Loading...
