What to do if my Baltech VP-3470 Measuring Instruments device doesn’t switch on, but the red LED lights up when charging?
If your Baltech Measuring Instruments device doesn’t switch on, but a red LED lights up when you connect the battery charger, it likely means the battery is discharged. Connect the battery charger and charge the battery until a green LED lights up.
General| Brand | Baltech |
|---|---|
| Model | VP-3470 |
| Category | Measuring Instruments |
| Language | English |
General safety guidelines for using the BALTECH VP-3470, including adherence to standards and intended use.
Ensuring operator safety during balancing, focusing on access to moving parts and safe operational practices.
Guidelines for safe operation of the device's laser tachometer, including precautions against direct eye exposure.
Ensuring trial and correction weights are fixed securely and do not interfere with normal machine operation.
Specific guidelines for sensor placement during balancing and diagnostic procedures for effective analysis.
Program for performing various types of vibration measurements and analysis.
Program dedicated to performing rotor balancing procedures.
Performs overall vibration measurement, capturing RMS values across a frequency range.
Measures vibration amplitude and phase relative to a reference signal, crucial for balancing.
Detailed procedure for performing and saving overall vibration measurements.
Procedure for setting up and capturing peak and phase data.
Procedure to initiate and configure parameters for a new balancing operation.
Allows manual entry of balancing parameters when automatic calculation is not used.
Process for performing scheduled balancing of a machine using existing reports.
Utilizes the Influence Coefficient Method for efficient rotor balancing.
Detailed steps for performing a new balancing procedure, including parameter setup and measurement.
Explains the ICM and its application in balancing, allowing for rotor balancing within a single run.
Lists common device problems, their causes, and recommended corrective actions.
To Next Page