Baltech VP-3470 - Routes; Figure 35. Report Saving; Figure 36. List of Routes

52 Measurements
BALTECH VP-3470
Operation manual
If the measurement value is red, it is incorrect!
3. Press 0 > Enter to save the measurement result. (Figure 4)
Figure 35. Report saving
8.3. Routes
Configure the routes in the BALTECH Expert software (see the Operation manual)
and download it to the vibrometer-balancer BALTECH VP-3470 (if the Route was not
configured and downloaded before).
Activate the Route function.
Figure 36. List of routes