4 Content
BALTECH VP-3470
Operation manual
Content
1. Conventions 9
2. Introduction 10
3. Safety measures 11
3.1. General provisions 11
3.2. Personnel safety 12
3.3. Machine operation mode during the balancing procedure 12
3.4. Laser safety 14
3.5. Installation of trial and correction weights 14
4. Technical description 15
4.1. Application 15
4.2. Technical characteristics 15
4.3. Delivery set 17
4.4. Design and operation of the display 19
4.5. Marking and packing 22
5. Operation conditions and prestarting procedures 24
5.1. Operation conditions 24
5.2. Preparation to operation 24
5.2.1. Unpacking and installation 24
5.2.2. Accelerometer installation during vibration control 25
5.2.3. Installation recommendations 26
5.2.4. Accelerometer installation during the balancing and diagnostics 27
5.3. Laser tachometer installation 28
5.3.1. Angular marking of the rotor 30
5.3.2. Preparation of the correction weights 30
5.3.3. Digital angle gauge 32
5.4. Power connection 33
5.5. PC connection 34
5.6. Switching on 36
5.7. Switching off 37
6. Programs and functions 38
7. General settings 41
To Next Page
Loading...