12 Safety measures
BALTECH VP-3470
Operation manual
It is strictly prohibited to use the instrument if the atmosphere contains more than
20 per cent of the lower explosive limit of a flammable or explosive substance.
3.2. Personnel safety
During the on-site balancing an operator should have safe access to moving parts to
install trial and correction weights on them. Strictly observe the safety instructions
specifying actions that allow safely stopping the machine operation and instructions
related to the use of auxiliary equipment, excluding its contact with rotating
components.
3.3. Machine operation mode during the balancing procedure
During the on-site balancing the machine starts up and stops repeatedly that can
cause excessive loads. In this case the machine operation requires a special analysis.
The example of this analysis is given in the Table 1 “Safety measures for some types
of machines”.
Repeated startups and stops may result in reliability degradation and service life
reduction of the machine.
To Next Page
Loading...