BALTECH VP-3470
Operation manual
Safety measures 11
3. Safety measures
3.1. General provisions
BALTECH VP-3470 is a vibrometer balancer that can be used by any technician
who has received the training at the BALTECH training centre on the course TOP-
105 “Dynamic balancing of the rotors in the own bearings or on the balancing
machines” or TOP-103 “Foundations of the vibration diagnostics”. The instrument
should be used only for its intended purpose. Always observe safety precautions
according to ISO 20806-2007 “Mechanical vibration. Criteria and safeguards for the
in-situ balancing of medium and large rotors”.
Nonobservance of the safety requirements may result in serious injury, death or
failure of the instrument.
For this purpose:
• Do not use the instrument if there are any damages.
• Always use the instrument only for its intended purpose.
• Observe the safety regulations related to the operation of electrical installations.
The vibrometer-balancer BALTECH VP-3470 should be powered from the constant
low voltage generated by a network adapter or internal batteries.
Keep sensors and cables away from moving parts.
To Next Page
Loading...