86 Troubleshooting
BALTECH VP-3470
Operation manual
12. Troubleshooting
12.1. Potential problems and correction methods
The potential problems and corrections method are given in the Table 8.
Table 8. Potential problems
Problem Reason Correction
The device doesn’t
switch on, but
when connecting
the battery charger
a red led lights up
Battery is discharged Connect the battery
charger and charge the
battery till a green led
lights up
The device doesn’t
switch on, but
when connecting
the battery charger
a red led doesn’t
light up
Excessive battery discharge Connect the battery
charger and charge the
battery till a green led
lights up. The charging
can take several days.
After switching on set the
date and time.
The device doesn’t switch on, but when connecting the battery charger a red led
doesn’t light up Excessive battery discharge Connect the battery charger
and charge the battery till a green led lights up. The charging can take several days.
After switching on set the date and time.
12.2. Error report
If any unknown error messages appear, consult with the BALTECH specialists.
Correction of unknown faults should be conducted only by the BALTECH specialists.
To Next Page
Loading...