14.4.7 iVu Plus Barcode Reader (BCR) Gen2 Series Sensor EDS File
Installation in ControlLogix Software
Use the EDS Hardware Installation Tool to register the Electronic Data Sheet (EDS) file.
1. On the Tools menu, click EDS Hardware Installation Tool.
The Rockwell Automation's EDS Wizard dialog displays.
Figure 90. Tools—EDS Hardware Installation Tool
2. Click Next.
3. Select the Register an EDS file(s) option.
Figure 91. Rockwell Automation's EDS Wizard—Options
4. Browse to locate the EDS file and click Next.
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 107
To Next Page
Loading...
