Banner iVu Plus BCR Gen2 Series - 9 Device Inspection Menu; Barcode Menu; Barcode Type

9 Device Inspection Menu
Main Menu > Inspection
The Inspection menu icon is located on the Main Menu. Use the Inspection Menu to set inspection parameters for the
currently running inspection and to manage stored inspections.
9.1 Barcode Menu
Main Menu > Inspection > Barcode
The Barcode Menu includes Barcode Type, Barcode Count, Data Compare, and Scan Time Limit.
Figure 24. Barcode Menu
9.1.1 Barcode Type
Main Menu > Inspection > Barcode > Barcode Type
The first time the sensor is powered up, DataMatrix, QR Code, and All Linear barcode types are selected. Select the desired
barcode types to be read. As a best practice, select only the applicable barcode type(s) for your particular application. Note
that if All Linear is not selected, a single linear barcode type can be selected instead.
The following barcode types are available:
• DataMatrix (ECC 200) barcodes
• QR Code (QR and Micro QR)
• Linear barcodes: Code 128, Code 39, Code 93,
CODABAR, Interleaved 2 of 5, EAN13, EAN13-Addon,
EAN8, UPCE, UPCE-Addon, Postnet, IMB, and
Pharmacode
• DataBar, DataBar Limited, DataBar Expanded
• PDF417
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 39