Note: Banner does not recommend setting up inspections using these 8-bit grayscale images because
you will need to modify the
configuration after loading it on the iVu BCR on the line. A better choice is to
set up the inspection on the iVu BCR Emulator using the Inspection Logs from the iVu BCR.
5.2.4 About
Use About to view Vision Manager software information, including the version number.
5.3 Sensor Screen
Displays the device interface the same as on the actual device display or remote display.
Use the interface in the same manner as the iVu BCR display.
Figure 18. Sensor Screen
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 27
To Next Page
Loading...
