The iVu BCR command channel is a bi-directional communication protocol that currently supports ASCII via the RS-232
serial interface or Ethernet interface, and enables other devices to remotely control the iVu BCR and to access device
information and inspection results.
Figure 43. Command Channel Menu
Connection
Main Menu > System > Communications > Command Channel > Connection
Use the Connection screen to enable or disable the Command Channel.
Figure 44. Connection Screen
Delimiters
Main Menu > System > Communications > Command Channel > Delimiters
Three delimiter options are available from the Delimiters screen:
• Field Delimiter—Determines what is used to separate data that the iVu BCR is sending out to a remote device.
• End of Frame—Determines the delimiter used to indicate the end of a frame.
• String Delimiter—Determines what is used to enclose a string
field during both input and output operations.
Use the drop-down lists to select the appropriate delimiter. The example at the lower part of the screen displays how the
data will look in the output or input streams.
Figure 45. Delimiters Screen
11.5.5 Data Export
Main Menu > System > Communications > Data Export
iVu Plus BCR Gen2 Series Sensor
58 www.bannerengineering.com - Tel: + 1 888 373 6767
To Next Page
Loading...
