Banner iVu Plus BCR Gen2 Series - Input and Output Flags

WORD # WORD NAME DATA TYPE
303-320 Barcode-4 Data 32-bit length + 32-byte array
321 Barcode-5 Type 16-bit integer
322 Barcode-5 Length 16-bit integer
323-340 Barcode-5 Data 32-bit length + 32-byte array
341 Barcode-6 Type 16-bit integer
342 Barcode-6 Length 16-bit integer
343-360 Barcode-6 Data 32-bit length + 32-byte array
361 Barcode-7 Type 16-bit integer
362 Barcode-7 Length 16-bit integer
363-380 Barcode-7 Data 32-bit length + 32-byte array
381 Barcode-8 Type 16-bit integer
382 Barcode-8 Length 16-bit integer
383-400 Barcode-8 Data 32-bit length + 32-byte array
401 Barcode-9 Type 16-bit integer
402 Barcode-9 Length 16-bit integer
403-420 Barcode-9 Data 32-bit length + 32-byte array
421 Barcode-10 Type 16-bit integer
422 Barcode-10 Length 16-bit integer
423-440 Barcode-10 Data 32-bit length + 32-byte array
14.6.4 Input and Output Flags
The Input Bits are used to command execution of basic functions. The Output Bits are used to push single bit outputs from
the iVu BCR device to the PLC. The 32 bits of iVu BCR output can also be accessed using the bits of the
first two Output
Registers (Input Bits ACK Register(word 0) and Output Bits Register (word1)).
Table 23: Inputs Bits Register
Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Command
Set BCR
Mask
Set BCR
String
Gated
Trigger
Trigger
Teach
Latch
Product
Change
Table 24: Bit Position
Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Command
ACK
Set BCR
Mask
ACK
Set BCR
String
ACK
Gated
Trigger
ACK
Trigger
ACK
Teach
Latch
ACK
Product
Change
ACK
Table 25: Output Bits Register
Bit Position
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Execution
Error
System
Error
Teach
Error
Missed
Trigger
Output 3 Output 2 Output 1
Ready
Latch
Read/No
Read
Pass/Fail Ready
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 129