EasyManua.ls Logo

Banner iVu Plus BCR Gen2 Series - Enabling Communications; Setting up Ethernet Communications

Banner iVu Plus BCR Gen2 Series
203 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Byte Offset Field ID Size in Bytes Data Type Description
34-63 Reserved 30 byte Reserved for future use
Note: If FOV's are adjusted so that they are smaller, the bitmaps will also be smaller.
Image Export Sample Application
The iVu BCR installation package has an Image Export sample application that provides a way to save exported images. In
a production environment, you need to write your own application to process exported images, for example to display them
on an HMI or to save them to disk.
Figure 62. Image Export Sample Application
13.2 Enabling Communications
13.2.1 Setting Up Ethernet Communications
Configure both the PC and the iVu BCR using the following instructions.
Windows XP
1. Open Network Properties on the Windows XP
8
PC (right-click on the Network Neighborhood icon).
2. On the Local Area Connection, right-click on Properties.
3. In the dialog, click Internet Protocol (TCP/IP) and click Properties.
8
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 73

Table of Contents

Related product manuals