9.3.2 Add New
Main Menu > Inspection > Stored Inspections > Add New
Use Add New to add a new inspection. The iVu BCR can store up to 30 inspections. When you add a new inspection, it
begins running. When adding a new inspection, specify the name for the new inspection.
Figure 26. Add New Screen
9.3.3 Startup
Main Menu > Inspection > Stored Inspections > Startup
Click Startup to select the inspection to use as the startup inspection. The selected inspection automatically starts after the
iVu BCR powers up.
9.3.4 Delete Inspections
Main Menu > Inspection > Stored Inspections > Delete
Click Delete to delete stored inspections. Note that any running inspection, or the inspection marked as the Startup
inspection, cannot be deleted.
9.3.5 Set Name/ID
Main Menu > Inspection > Stored Inspections > Set Name/ID
Use Set Name/ID to change the name or ID of an inspection. Sort the inspections in numeric or alphabetical order by
clicking on the icon beside the Help icon. Click Name to edit the name of the inspection. Click ID to change the ID of the
inspection.
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 47
To Next Page
Loading...
