8. Get the barcode data read by the iVu sensor.
>> get bcr_result data\x0D\x0A
<< OK\x0D\x0A
<< "0043000011201"\x0D\x0A
13.4.4 Command Channel Reference
Info Command Group
Command Group Item Description
Get Info CompanyName The company name as a string.
Get Info ModelNumber The device model number as a string.
Get Info FirmwareVersion The device firmware version as a string.
Get Info SerialNumber The device serial number as a string.
Get Info Name The device name as a string.
Get Info BootNumber The number of device bootups.
Get Info UpTimer The elapsed time the device has been running. The format is
hh:mm:ss:msec.
Get Info HourCount The number of hours the device has been running.
Get Info RemoteConnected The remote display connected status as a Boolean value (true or false).
Get Info RemoteModelNumber The model number of the remote display as a string.
Get Info RemoteSerialNumber The serial number of the remote display as a string.
Examples
>> get info companyname\x0D\x0A
<< OK\x0D\x0A
<< "Banner Engineering Corp."\x0D\x0A
>> get info bootnumber\x0D\x0A
<< OK\x0D\x0A
<< 42\x0D\x0A
>> get info uptimer\x0D\x0A
<< OK\x0D\x0A
<< 4:42:42:324\x0D\x0A
System Command Group
Command
Group Item Description
Do System Reboot Reboots the device. Pre-empts other commands except Save.
Do System Save Saves inspection and configuration parameters. Blocks until finished.
Should be used sparingly.
Get Ethernet IPAddress Get the current active IP address of the device as a string.
Get Ethernet SubnetMask Get the current active subnet mask of the device as a string.
Get Ethernet Gateway Get the current active Gateway address of the device as a string.
Set Ethernet IPAddress Set the IP address of the device. A valid IP address must be supplied as
a string (for example: 192.168.0.1). A Reboot command from the
command channel must follow to make the new IP address effective.
You may also set new Subnet Mask and Gateway address as required
before a Reboot command is sent to the device.
iVu Plus BCR Gen2 Series Sensor
86 www.bannerengineering.com - Tel: + 1 888 373 6767
To Next Page
Loading...
