When Data Export is enabled, the iVu BCR transmits selected inspection data when triggered.
Connection
Main Menu > System > Communications > Data Export > Connection
Use the Connection screen to enable or disable the Data Export.
Figure 46.
Connection Screen
Data To Export
Main Menu > System > Communications > Data Export > Data To Export
The options in the Data To Export screen determine what barcode data is exported via the serial port.
Note: Grab the edge of the Data To Export screen and pull down to allow all information to show.
Figure 47. Data to Export Screen
Output Format
Main Menu > System > Communications > Data Export > Output Format
In the Output Format screen, use the drop-down lists to select Start and End Strings as well as Delimiter. The Example
field
shows how the data will look when it is output.
Figure 48. Output Format Screen
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 59
To Next Page
Loading...
