Figure 132. Hardware Catalog
In the above example, the iVu BCR device is located under Other field devices > PROFINET IO > Sensors > Banner
Engineering Corp > Banner Vision Sensors > iVu Series.
7. Select the device and add it to the
configuration.
Selection Option Description
Drag Drag the iVu BCR from the Hardware catalog directly into the configuration.
Double-click Double-click on the iVu BCR and add it to the configuration.
8. Click the green square on the iVu BCR icon. Drag the pointer to the green square on the PLC_1 icon to connect the
device to the controller (PLC).
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 149
To Next Page
Loading...
