Figure 139. Assign IP Address—Accessible Devices
The Select device window searches the network for available devices.
15. Determine the device to be adjusted via the MAC address and select it.
Note: Use the display to
find the MAC address. Main Menu > System > Communications >
Ethernet IO > Status
16. Click Apply.
Figure 140. Select the Device and Apply Changes
The IP address for the device is updated.
17. Click Assign IP address to complete the step.
This step is completed for every device.
iVu Plus BCR Gen2 Series Sensor
152 www.bannerengineering.com - Tel: + 1 888 373 6767
To Next Page
Loading...
