Banner iVu Plus BCR Gen2 Series - Page 66

Ready
(Pass) (Fail) (Pass)
(Pass)
(Fail)
(Pass)
Strobe Out
(Configure as External
& Expose Based)
Outputs 1, 2, and 3
(Set as Active Pass)
Outputs 1, 2, and 3
(Set as Active Fail)
Function
Figure 53. NPN Outputs
Note:
Table 6: Expected iVu Output Signal Voltage
ON OFF
PNP + V 0 V
NPN +1 V +V
iVu Plus BCR Gen2 Series Sensor
66 www.bannerengineering.com - Tel: + 1 888 373 6767