The Communication Log contains logs for the four communications channels: Industrial Ethernet, Command Channel, Data
Export, and Image Export.
The following features are available for each of the logs:
• Click the icon in the upper left corner of the screen to show/hide the time column
• Click Clear Log at the bottom of the screen to clear the log
• Click Save to save the Log to the USB flash drive
Note: Communication log does not log changes while in Demo mode. Additionally, the Emulator does not
log changes.
iVu Plus BCR Gen2 Series Sensor
www.bannerengineering.com - Tel: + 1 888 373 6767 69
To Next Page
Loading...
